Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
AST 94-01 Subaru Impreza G10 AWD 5100 Comp Coilovers w/ Springs & Top MountsAre you using your vehicle on the track? Or perhaps youre after a combination of track performance and seeking the ideal road balance for daily driving. In that case, the 5100 CLUBRACING SUSPENSION is the perfect choice for you. This set of coilovers enables you to optimize grip by managing rebound and ride height. Springs are included and top mounts front and rear. In this set front and rear dampers utilize a coilover design. By choosing this design
Are you using your vehicle on the track? Or perhaps you’re after a combination of track performance and seeking the ideal road balance for daily driving. In that case, the 5100 CLUBRACING SUSPENSION is the perfect choice for you. This set of coilovers enables you to optimize grip by managing rebound and ride height. Springs are included and top mounts front and rear. In this set front and rear dampers utilize a coilover design. By choosing this design you prioritize adjustability and the performance of your car. Coilovers which will offer more adjustability for both damping settings and ride height, and typically provide more consistent and predictable handling characteristics. You have the flexibility to adjust springrates on these dampers. The initial setup for setting and spring rates is rooted in our extensive development and testing process. Individual preferences can easily be fine-tuned by making adjustments to the rebound knob or altering the ride height. You can adjust the rebound, means you can control the return to extension of your dampers, enabling you to attain the ideal road balance tailored to your specific requirements. With 12 distinct positions to choose from, each adjustment delivers distinct feedback and a unique driving experience. This set of suspension also includes, where applicable, camber-adjustable front Top Mounts and solid rear Top Mounts. The camber adjustment will offer you more wheel adjustment and allow this geometry to be altered to transform front -end grip. AST Suspension is a monotube design. This is a benefit for you because these dampers offer a large piston to control the adjustability of rebound damping. There is no aeration or foaming in monotube dampers, this will result in a more responsive valving. These dampers are rebuildable, which means that if any damage or issues arise, you can have them addressed at a certified AST service center.This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1993-1995 | Subaru | Impreza | Base |
| 1996-1997 | Subaru | Impreza | Brighton |
| 1993-2001 | Subaru | Impreza | L |
| 1993-1994 | Subaru | Impreza | LS |
| 1995-1996 | Subaru | Impreza | LX |
| 1995-2001 | Subaru | Impreza | Outback |
| 1998-2001 | Subaru | Impreza | RS |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 2408 reviews
Sort
Product Reviews
★★★★★ 5
Great stuff
Seemed to work as well as or better than some more expensive catalytic converter cleaners. I put it in while at 1/3 tank and my Check Engine light went out almost immediately once I started driving. My Tundra has almost 230,000 miles and still runs great but was getting a little harder to start after I switched from full synthetic oil to conventional. I’ll never do that again and immediately switched back but the damage was done. Check engine light came on and I had to crank longer to get it started. Adding this Liquid Moly fixed both issues temporarily. I have to wonder if this was used regularly, say every 3 months, if it would clean the catalytic converter more permanently?
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025
★★★★★ 3
Ehh??
Didn't work for my on my 17 hyundai accent with 90k on it.
I poured the whole bottle in with a half tank of gas. And went for a 3 day italian tune up.... no dice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Works great
Follow instructions and it will work. Had a p420 code, caught it early used this. No more code and passed emissions
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
★★★★★ 5
Nice Filter Wrench for my Volvo V70XC!
Size: 86mm x 16
I was needing a filter wrench for my 2001 Volvo V70XC and couldn't find anything that fit from the local auto parts stores. Not knowing what to expect, I took a chance on this one since most of the reviews were 5 star and the price was exceptional.
When I received it, I was quite pleased with the construction and finish. I have a brand new oil filter housing for my Volvo (since the one currently on my car is chewed up from the former owner using slip-jaw pliers or something on it) and the fit is perfect! I have worked as a mechanic my whole life (aircraft & automotive), and spent a couple of years as a technician at an automotive dealership and I can say that the tool looks like it is designed for heavy-duty use.
The stamped steel housing is thicker than those found in local auto parts stores and the drive adapter has a thick arc welded bead along the inside of the tool. So, it appears to be made to hold up to some fairly heavy torque. Although the product description states that it is 1/2", the drive adapter is actually made for direct attachment to a 3/8" drive. Perhaps this error stems from the fact that they offer a much larger wrench (118-131mm) and this is a more accurate description of their other offerings.
The 3/8" drive adapter works perfectly and a 21mm socket fits nicely on the external hex. Fits with SAE sizes are a mixed bag, though. I was able to attach a 13/16" 12-pt. box-end wrench, but not the opposing open-end. A similarly sized 13/16" 6-pt. socket was extremely tight, so I wouldn't recommend this size and would just go with the 21mm if you had to use the external hex. Otherwise, just use the 3/8" drive adapter for easiest use of this tool. The adapter also incorporates ball detents on all four sides of the internal 3/8" drive, so your ratchet or extension won't easily fall off while in use.
Since this tool is made for oil filter removal & installation, I'm sure that it will deliver as promised. I'll post an update after my next oil change and I get a chance to use it and install the new filter housing I have.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2014
★★★★★ 5
Makes the job easy
Size: 88.5mm x 16
Worked well for removing and installing the oil filter housing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026