Schluter Systems SCHIENE 0.25-in W x 98.5-in L Satin Anodized Aluminum L-Angle Tile Edge TrimSCHIENE Satin Anodized Aluminum Tile Edge Trim, 0. 25 in x 98. 5 in The Schluter SCHIENE profile protects exposed tile edges while creating clean, same height transitions to adjacent floor coverings. Made from satin anodized aluminum with an 87 sloped reveal, it shields tile from chipping and delivers a discreet, professional finish along floors and thresholds. Key Features: Edge Protection: 87 sloped reveal transfers point loads and guards tile edges

SCHIENE Satin Anodized Aluminum Tile Edge Trim, 0.25-in x 98.5-in

The Schluter SCHIENE profile protects exposed tile edges while creating clean, same-height transitions to adjacent floor coverings. Made from satin anodized aluminum with an 87° sloped reveal, it shields tile from chipping and delivers a discreet, professional finish along floors and thresholds.

---

Key Features:

• Edge Protection: 87° sloped reveal transfers point loads and guards tile edges from chipping
• Clean Transitions: Approximately 1/8 in visible surface for a minimal, elegant look between floor coverings
• Formable Design: Anchoring leg available with radius perforations to create gentle curves
• Durable Aluminum: Satin anodized aluminum resists wear in residential and light commercial floors
• Long Length: 98.5-in profile for continuous runs with fewer seams

Please check the Product Data Sheet Here

---

Specifications Table:

Specification	Details
Product line	Schluter SCHIENE
Profile type	L-angle edging profile for floors
Material	Satin anodized aluminum
Width (visible surface)	Approximately 1/8 in (3 mm)
Length	98.5 in (approx. 10 ft / 3.05 m select finishes)
Edge angle	87° sloped reveal to protect tile edges and transfer point loads
Curving capability	Available with radius perforations for forming curves
Primary use	Same-height transitions between tile and adjacent floor coverings; edge protection at thresholds and expansion joints

---

Frequently Asked Questions (FAQ):

Q: What applications is SCHIENE best for?
A: It’s used at same-height transitions between tile and adjacent coverings (like carpet or vinyl), at expansion joints, and as decorative edging on floors.

---

Q: Can this profile be curved?
A: Yes. Versions with special radius perforations in the anchoring leg can be bent to form curves.

---

Q: How visible is the trim once installed?
A: It features an approximately 1/8 inch (3 mm) exposed surface for a discreet look.

---

Q: Is it suitable for wet areas?
A: Aluminum profiles are generally suitable for interior dry or intermittently wet areas; avoid harsh chemical exposure. Consider stainless steel for high-moisture or heavy-duty environments.

---

Q: What length does this trim come in?
A: Select finishes are available in 10 ft (3.05 m) lengths; this model is 98.5 inches long.

---

A Sleek Line That Elevates the Floor

SCHIENE draws a crisp, modern line that quiets the visual noise between surfaces. Its satin anodized sheen and fine 1/8-inch reveal deliver a couture finish that frames stone and porcelain with effortless polish. Bend along soft arcs to trace architectural curves or run it straight for gallery-clean thresholds. It’s a small detail with outsized luxury—essential trim for impeccably edited spaces.

---

Finish your flooring project with SCHIENE for a durable, minimalist transition that looks custom-crafted.