Pay in installments of $1185.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 24 - Jul 29
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
034Motorsport Camshaft Kit for Supercharged Audi 3.0 TFSI - B8 S4/S5/Q5 & C7 A6/A7 - 034-201-1006034 Motorsport Camshaft Kit for Supercharged Audi 3. 0 TFSI B8 S4 S5 Q5 & C7 A6 A7 034 201 1006. Please note 1006 is for models B8 2009 2012. The 034Motorsport Camshaft Kit for the 3. 0 TFSI Supercharged Engine is designed to be a direct drop in replacement for the factory camshafts, valve springs, and retainers. The 034Motorsport Camshaft Kit is designed to improve the powerband of the 3. 0 TFSI engine to redline by lengthening the time the intake
034 Motorsport - Camshaft Kit for Supercharged Audi 3.0 TFSI - B8 S4/S5/Q5 & C7 A6/A7 - 034-201-1006.
- Please note 1006 is for models B8 - 2009-2012.
The 034Motorsport Camshaft Kit for the 3.0 TFSI Supercharged Engine is designed to be a direct drop-in replacement for the factory camshafts, valve springs, and retainers. The 034Motorsport Camshaft Kit is designed to improve the powerband of the 3.0 TFSI engine to redline by lengthening the time the intake valves are open, while still retaining the bottom-end torque.
The 034Motorsport Camshaft Kit comes with all four camshafts, new valve springs, and new valve spring retainers. The 034Motorsport Camshaft Kit is only recommended for vehicles with a dual pulley ratio on 034Motorsport Dynamic+ Stage 2+ ECU Tuning. The Camshaft Kit does not require a custom tune.
Note: Please review the installation guide before installing.
The 034Motorsport Camshaft Kit for the 3.0 TFSI Supercharged Engine is designed to be a direct drop-in replacement for the factory camshafts, valve springs, and retainers. The 034Motorsport Camshaft Kit is designed to improve the powerband of the 3.0 TFSI engine to redline by lengthening the time the intake valves are open, while still retaining the bottom-end torque.
The factory camshafts in the 3.0 TFSI Supercharged Engine are designed to be paired with the factory supercharger. The 034Motorsport Camshaft Kit comes with all four camshafts, new valve springs, and new valve spring retainers. The 034Motorsport Camshaft Kit is only recommended for vehicles with a dual pulley ratio on 034Motorsport Dynamic+ Stage 2+ ECU Tuning. The Camshaft Kit does not require a custom tune.
When Are Camshafts Needed?
To generate more power in an engine, the air and fuel entering the combustion chamber need to be increased. The 034Motorsport Camshafts allow the intake valve to open more, allowing more air into the combustion chamber. The 034Motorsport Camshafts allow for increased peak power while retaining drivability and efficiency.
Features:
- Manufactured by One of the Premier Performance Cam Manufacturers, Cat Cams, Exclusively with 034Motorsport Engineering and Tuning Calibration Departments
- Single-Piece Steel Billets to Improve Stiffness and Strength, Allowing Higher Acceleration Cam Profiles.
- Increased Lift and Duration, Resulting in Additional Power and Torque
- ~30 Peak Wheel Horsepower*
- ~10-15 Peak Wheel Torque*
- Includes Valve Springs and Retainers to Reduce Valve Train Mass.
- Stock-Like Driveability.
- Measured Power Gains on a 034Motorsport Stage 2+ E40 Tune, Stock Throttle Body, Stock Blower, Stock Cats.
034Motorsport Camshaft Specifications:
| Duration @ 0.1mm | Duration @ 1.0mm | Valve Lift | Cam Lift | Lobe Angle | Timing @ 1.0mm | Valve Lift @ TDC | ||||||||
| Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | |
| OE Audi Camshafts | 252° | 257° | 201° | 210° | 10.05mm | 10.00mm | 6.00mm | 5.95mm | 128° (88°) | 114° | -28° / 49° | 39° / -9° | 0.00mm (2.42mm) | 0.40mm |
| 034Motorsport Camshaft Kit | 262° | 271° | 215° | 225° | 11.25mm | 11.00mm | 6.65mm | 6.55mm | 128° (88°) | 114° | -21° / 56° | 46° / -1° | 0.00mm (3.35mm) | 0.90mm |
What's Included:
- (2x) Intake Cams
- (2x) Exhaust Cams
- (24x) valve Springs
- (24x) Valve Spring Retainers (Top)
- (24x) Valve Spring Retainers (Bottom)
Fitment:
Please note: 034-201-1006 is for models B8 - 2009-2012 and 034-201-1007 is for B8.5
| Make | Model | Years | Chassis | Engine |
|---|---|---|---|---|
| Audi | A6 | 2009-2011 | C6 | 3.0 TFSI (select B8 cams) |
| Audi | A6 | 2012-2014 | C7 | 3.0 TFSI (select B8.5 cams) |
| Audi | A7 | 2012-2014 | C7 | 3.0 TFSI (select B8.5 cams) |
| Audi | A8 | 2011-2013 | D4 | 3.0 TFSI (select B8.5 cams) |
| Audi | S4 | 2009-2017 | B8/B8.5 | 3.0 TFSI |
| Audi | S5 | 2009-2017 | B8/B8.5 | 3.0 TFSI |
| Audi | Q5 | 2013-2017 | B8/B8.5 | 3.0 TFSI |
| Audi | Q7 | 2011-2015 | 4L | 3.0 TFSI (select B8.5 cams) |
| Audi | SQ5 | 2012-2017 | B8/B8.5 | 3.0 TFSI |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy