Pay in installments of $33.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 24 - Jul 29
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
AFE 46-20118 BladeRunner Cold Side Intercooler PipeThe AFE 46 20118 BladeRunner Cold Side Intercooler Pipe is a 3"mandrel bent replacement for your stock 2011 2016 GM 6. 6L Duramax LML. Perfect Fit: Tube lines up directly to factory couplings for a convenient, tight and secure installation with minimal parts. Flow and Performance: The intercooler tube is constructed of 3"mandrel bent aluminum tubing for maximum flow then, powder coated for a nice finish. The high temp wrinkle black powder coating also
The AFE 46-20118 BladeRunner Cold Side Intercooler Pipe is a 3"mandrel-bent replacement for your stock 2011-2016 GM 6.6L Duramax LML.Perfect Fit:
Tube lines up directly to factory couplings for a convenient, tight and secure installation with minimal parts.
Flow and Performance:
The intercooler tube is constructed of 3"mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. Also included, one 1/8" NPT port is provided for connecting a pressure sensor or water methanol injection. The smooth transition bends decrease turbulence and minimize pressure loss, while increasing horsepower and torque. Installs on the Cold-Side to transfer cooled air smoothly to the engine for better performance.
Installation is a snap:
Utilizes the factory mounting locations for a hassle-free installation. Includes high quality stainless steel T-bolt clamps and heavy-duty 5-Ply polyester reinforced couplings for strength. Fits OEM or AFE's upgraded intercooler.
AFE Badging:
Unique stainless steel laser-cut AFE Power logo plate is welded-on for an aggressive style.
Features:
- Stainless Steel
- 100% MIG-Welded
- All Hardware Included
- Cold Side Tube Fitment
- Hassle-Free Installation
- Welded-On AFE Power Plate
- Works With AFE Or OE Intercooler
- Outflows Stock Intercooler Tube By 6%
- Powder-Coated Wrinkle-Black For Heat & Corrosion Resistance
- Constructed From 3" Mandrel-Bent Aluminum Tubing For Increased Flow
- One 1/8" NPT Port Provided For Connecting Pressure sensors Or Water Methanol Injection
- Uses All Factory Mounting Locations & Includes All Necessary Hardware For Hassle-Free Installation
- Includes Premium Stainless-Steel T-Bolt Clamps & Silicone Couplings For Long Life, Perfect Fit & Strength
WARRANTY INFO:
1 Year
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 15 reviews
Sort
Product Reviews
★★★★★ 5
Bang for buck
Size: 11SMax-24Pack
You get a lot for the price. And it fits. Recommended. It is a little noisier than the original bit functions are the same
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2026
★★★★★ 5
Good Replacement Set
Style: 19 Pack
Good replacement set for the price. Parts are basically like the originals and are easily installed for a perfect fit for the 25C.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 11, 2025
★★★★★ 5
Rejuvenates your Robovac, but one caution
I was a little wary buying third-party aftermarket parts for my Eufy Robovac 30c, however, all the parts in this kit are virtually identical to OEM parts. I replaced all three brushes and all three filters and let it loose on my Golden Retriever-inhabited living room. I can honestly say the result was a 50% increase in the amount of fur collected. I suspect that over time there is a loss of performance so gradual that it's easy to not notice. I assume the new filters returned the vacuum power to it's original level of suction was a big factor.
When I was browsing through all the available choices here on Amazon, a plastic "ring" kept appearing in many of the product images, however, people did not know what it is for or simply did not get one in their shipment. If you look at the photos I've attached one can see that I did indeed get one and figured out its purpose, to remove fur and/or hair from the horizontal brush.
The bottom line is that I would definitely buy this item again.
===========
EDIT, four weeks later: Since replacing the main roller brush with the one included with this product, I have experienced several “Roller brush is stuck” shutdowns and alerts. In each case, there has been nothing tangled in the brush and the brush was free to spin. I have to say it’s quite annoying to come home expecting the floor to be cleaned but only to find this error long before the job was finished. Today it gave this error twice in one cleaning cycle. I never experienced this problem with the OEM roller brush.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2019
★★★★★ 5
Euphy works good as new!
Style: 19 Pack
As soon as I opened the package everything looked the same- pre-filters, filters, main brush, and side brushes. I changed the big brush first;the only issue was the new brush body didn't have the white arrows to help aligning but that didn't affect how the brush worked. I changed filter and pre-filter, and finally the side brushes.
When I turned on my "Goophy" and tried to let her run the side brushes were a little too (Goophy's side brushes sounded a little louder). I trimmed the side brushes a little and all was well. Goophy didn't want to run herself but it didn't take long for me to figure out it wasn't the new brushes ;just the operator pushing the wrong button. My Goophy Euphy did what she was supposed to do- vacuum the carpet and tile floor. Goophy Euphy still wanted to take the long way to her charging station which was nothing new and easily corrected.
Over all the new brushes and filter restored Goophy Euphy back to when we first used her!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2023
★★★★★ 4
Don't be cheap like me - buy these and save yourself the hassle!
Style: 19 Pack
I made the mistake of going with another, slightly cheaper set of replacement parts for our Eufy RoboVac 11S. I did not heed the cautionary tales which lead me having to find replacement parts for the replacement parts. This brand fits our vacuum perfectly - the corner brushes don't pop off, the filter is the right size and the roller brush gets sufficiently tangled with cat hair so clearly also a good fit. My only concern (and why I only gave four stars) is - surprise! - the corner brushes. Do they stay on? YES! In fact, they is so secure, I had difficulty swapping one out. Here's the peculiarity of the brand - the "whiskers" on the spinner fell out. I found them all over the floor, on different surface types and under various conditions; they were not getting caught on any one thing. Not all at once, but over two or three uses, one of the corner brushes had become devoid of almost two entire spokes! Ironically, the little guy can't seem to pick up his own mess but I digress. Without the whiskers to grasp, removing the part was difficult. I ended up using a small flathead screwdriver for leverage to pop it off. While the other corner brush appeared to have shed some whiskers as well, it was not in need of replacement. Despite the shedding, this will be my first go-to for replacement parts next go round.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2022