Fabtech K2333DL 2.5 BASIC COIL KIT W/ DL N/R 17-20 FORD F250/F350 4WD DIESEL.
SKU: 83227547861

Fabtech K2333DL 2.5 BASIC COIL KIT W/ DL N/R 17-20 FORD F250/F350 4WD DIESEL.

Sale price$1019.70 Regular price$1133.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Fabtech K2333DL 2.5 BASIC COIL KIT W/ DL N/R 17-20 FORD F250/F350 4WD DIESEL.This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional Wheel travel for offroad use. With the large Super Duty Wheelwell openings and this quality 2. 5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression

This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional Wheel travel for offroad use. With the large Super Duty Wheelwell openings and this quality 2.5in lift kit, you can run 35in tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. They will provide a superior ride quality both on and offroad with excellent damping for of

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 83227547861

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1153 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
S. Meunier
Alexandria, US
★★★★★ 5
Nice pipe shelves! Excellent quality!
Size: 28inch Tall (NOT included wood planks), Color: Black
I really like the fact that the pieces were already painted. I compared the cost of the unit to buying the pieces from the big box store and this was far more cost effective for me. The installation went well and I ended up creating a template for installation. For the template, I measured the width of one of the flanges (part that mounts to the wall), cut a piece of material the same width. I found the center and drew a line down the middle. I then placed the section with top and bottom holes over the center line and then marked the other two holes. I then drilled out the holes, put on wall and used level to plumb. I used small pilot drill bit to drill through the template into the wall. One thing to note is that I did not use the included anchors instead opting for some from the big box store.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2020
H
Verified Purchase
hman
Port Orchard, US
★★★★★ 5
Well built and priced
Size: 42inch Tall (NOT included wood planks), Color: Black
I saw these on line and decided I could probably just build one on my own. After pricing the parts out at the local hardware store, it was almost the same price, and opted for the less hassle pre-fab online kit. The material is well made, same as the hardware store, except the threads are shorter for easier assembly, and its painted for a cleaner look. I bought the 12"Dx42"L kit, and although I knew the measurements, it was a lot more massive than it looked in the picture. An 8' or 10"x 24"L kit would have fit my needs better. I only assembled 2 of the 3 sections, and will use the single section leftover for another shelf elsewhere, so it wasn't a problem. I'm happy with the end result and would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 28, 2020
A
Verified Purchase
Amazon Customer
New York, US
★★★★★ 5
So beautiful!
Size: 42inch Tall (NOT included wood planks), Color: Black, Size: 42inch Tall (NOT included wood planks), Color: Black
The poles are very sturdy. The order doesn’t come with wood but I only spent ~$15-20 on the wood and stain needed to shelve the poles. The only complaint I have is it was hard to install; mostly due to my lack of experience. It took most of the day to install and stain and cute the shelves. The poles weren’t completely flush to the wall and I couldn’t figure it out for the life of me. I love the way these turned out and I know these shelves will be coming with me to the next home I have. 10/10 would recommend, even with the hard installation. SO worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 26, 2019
A
Verified Purchase
AM
Whiting, US
★★★★★ 5
Fantastic for furniture making
Size: 16 x 18 Inch, Size: 16 x 18 Inch
Frankly, I didn't know what to expect... But these turned out to be exactly what I was looking and hoping for. These table legs were so easy to assemble. They come with adjustable feet so you can have a level table no matter your tabletop shape or floor situation. Assembly is done with a simple Allen key. Printed instructions are included with simple diagrams that are so easy to follow. Also, the seller provided all the hardware needed and more! They provided multiple black screws of different sizes that fit through the top holes of the legs, making it so easy to screw the leg base into the table top (use an electric drill with a Philips head for that). I had zero issues with any of the hardware provided. The base has a nice smooth black powder coat application on the metal. Shipping was so quick too. Seriously, if you are looking for a low cost, easy to assemble, good looking, and adjustable end table base, get this. I ended up making plant stands with these using some tree slices I had as you can see in my photo. 10/10 highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 3, 2026
P
Verified Purchase
Paul Thomas
Waukegan, US
★★★★★ 5
Great value, sturdy product
Size: 16 x 18 Inch, Size: 16 x 18 Inch
Made a custom built 24" round resin pour table, and this worked great for the base, looks good too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026

recommand products